Category: Aircraft

  • Tamiya Mosquito B Mk.IV/PR Mk.IV In Box Review

    Tamiya Mosquito B Mk.IV/PR Mk.IV In Box Review

    I managed to pick this Tamiya 1/48 Mosquito for around $45 CAD and despite the kit’s age I’m very happy with the purchase. I’ve never built a Mosquito (or any British fighter before) and made the safe choice to go with Tamiya. Initial impressions are pretty favorable, with crisp styrene and minimal flash present. It comes with three unique variants including a electric blue option.

    Kit features: 12/20

    Tamiya’s offering is pretty bare bones when it comes to kit features, offering not a lot more than decals and clear parts. One benefit of the kit is allowing the option to model the PR Mk.IV reconnaissance version of the Mosquito in addition to the standard Mk.IV version. In terms of armament, the kit not only includes bombs but also rockets, should the modeler choose to include them. The kit however looses points for no photoetch parts or other accessories. This disadvantage is somewhat mitigated however due to the fact that at the time of the kit’s 1999 release inclusion of photoetched parts wasn’t super typical and not expected at the kit’s pricepoint.

    Quality of Molding: 35/50

    The Mosquito features nice recessed panel lines and rivet details as well as passable cockpit details. When compared to modern releases however, the kit doesn’t reach the same levels of detail. Again however this must be expected due to the kit’s age. The kit gains back some points due to the fact that the detail is adequate and fully capable of building a nice looking model. Detail is really only omitted in hard to find areas such as the gear bay. In terms of molding quality no flash can be found, requiring little cleanup.

    Instructions: 11/20

    The instructions are the real weak part of the kit and don’t offer a whole lot more than the bare minimum. Tamiya’s instructions include a large camouflage profile which should help during painting. The instructions are in typical Tamiya style, folded out paper with no coloring. The downside of the instructions are very clear when compared to the instructions found in Meng’s E2 which was also reviewed on this site. The instructions however, are quite clear and easy to understand – the only real requirement for a kit’s instructions.

    Miscellaneous: 7/10

    Three different finishing options and two different variants help the Mosquito’s score in this area and the decal quality looks good considering they were manufactured over 20 years ago.

    Total: 65/100

    Initial impressions of Tamiya’s Mk.IV Mosquito are good and I have full confidence that the kit will shape up into a good looking model. At $45 CAD the price-to-kit ratio is quite high, and you get a lot of plastic for you money. this kit would be an excellent place to start with resin accessories or even just build OOB.

  • Tamiya Mosquito B.MkIV (Part 1)

    Tamiya Mosquito B.MkIV (Part 1)

    For my next project I wanted to go with something slightly large to gain more experience airbrushing. Seeing as I could get Tamiya’s 1999 Mk.IV Mosquito for a good price I decided to pull the trigger on it. I also wanted to use this kit as a “testbed” of sorts as I’ve also got Tamiya’s 1/48 He-219 “Uhu” on deck afterwards so I’ll need to have mastered the Sotar 20/20 by then to complete the Uhu’s complex camouflage pattern.

    In terms of the build, It’s been on the bench for about a week now and I;m happy with how it’s going. I appreciate the fit and design of the Tamiya kit after completing Miniart’s Bantam. I took the liberty of filling out the exhaust holes however found that they cannot be easily seen after final engine assembly.

    Most of the early construction has to do with building up the wings and cockpit as to be expected. I painted the interior parts with a mix of AK Grey Green and Intermediate Green with a single drop of Mr. Color leveling thinner. Paint was thinned in a rough 50/50 ratio with water. Thinned with Tamiya TS-13

  • Tamiya P-51K “Mrs.  Bonnie”

    Tamiya P-51K “Mrs. Bonnie”

    After starting in February, Tamiya’s 1/32 P-51K is finally complete. Aftermarket accessories include Eduard resin wheels and Aeroscale 1/32 instrument decals. The kit was a dream to build, highly recommended. The only problem that I had with the kit were the decals. even with aggressive setting solution they would not conform to panel lines and rivet detail. they were the only letdown of the kit. It was painted with various shades of Alclad, as well as Tamiya acrylics. This was my first time painting a NMF finish, so there are a few mistakes painting wise.

    I would absolutely recommend this kit to someone who wants to try their first 1/32 kit or even for someone who is highly experienced in the scale. Due to the high part count and complex assemblies it is not the best kit for first time model builders however.

     

  • Hasegawa F-16C”AV 525″

    Hasegawa F-16C”AV 525″

    This is Hasegawa’s 1/48 F-16CJ which has been updated into a CM variant. Improvements include a Aries resin cockpit, Astra Decals and a Quickboost pitot tube. Detail on the stock kit was quite basic although it had nice refined panel lines. The kit has been modeled after an aircraft of the fighter squadron at Aviano AFB, specifically one that is taking part in Operation Inherent Resolve. Painted with Tamiya acrylics and weathered with an oil wash. Weaponry has also been used from Kinetic’s F-16F kit as well. Overall very happy to have built a “Buzzard”.

    .

  • Kinetic F-16F Block 60 in UAE service

    Kinetic F-16F Block 60 in UAE service

     

    This is Kinetic’s F-16F Block 60, modeled in UAE service. the kit has great detail but is lacking in fit and sprue design, one AIM-9M that the kit comes with was broken in the box. otherwise the kit is quite good but I wouldn’t recommend it to a new modeler. The kit comes with a lot of external stores, enough to fill multiple aircraft so +1 to Kinetic for that. painted with Tamiya acrylics and weathered with an oil wash.