For the past few weeks I’ve been steadily building Eduard’s 1/48 F6F-5 Hellcat as a sort of “reset” build to complete before diving into the painting stage of the Tiger project. I picked the Hellcat because I’ve always had a soft spot for U.S Navy fighters and also because I wanted to move this kit out of the stash.
Construction was straightforward although a bit disappointing. This kit is by no means a new Eduard release with the molds dating back to 2008. This is not that ancient but in the grand scheme of things it’s a far cry from the hyper detail kits the brand is releasing nowadays. If you’d like to hear more about my thoughts on this kit, I did a out of box review on it last year:
Eduard’s Profipack Hellcat has impressive features including photo-etched parts, resin wheels, mask set, and armament options. However, its quality of molding is below-par as it lacks detail and crispness. Eduard’s excellent instructions and various marking options are commendable, albeit limited in color and vibrant prints. With a challenging price, the kit’s weekend edition provides better…
The chipping effects on this build required a two stage chipping process. The first stage consisted of a metallic colour underneath a custom zinc chromate mix chipped with standard hairspray chipping. This was done somewhat quickly as the results didn’t matter too much in that only a small fraction of this coat would be visible in the final model. After this coat was chipped, I hit it with a coat of hairspray and re-primed with 1500 black for the preshading coat.
The preshade/marble coat took an entire day to complete and I was very happy with how it came out in the end. I was able to get a lot of variability in the finish which I knew would be needed to show through the very dark blue final coat.
For the main coat I selected Mr. Colour 14 (Navy Blue). It’s a semi gloss paint to start and I added some GX100 gloss to increase the sheen which worked well I found. I knew that I’d be finishing this model in a gloss finish and wanted to make sure that my base coat was as smooth as possible.
I then got to work removing the masking fluid left behind as part of the weathering process and I was really happy with how this approach turned out. It was difficult at first to remove the fluid but with a plastic tool I was able to scrape it off quite efficiently. I was worried about paint peeling off in areas where the fluid was not applied but this ended up not being an issue as the main coat of Navy Blue was very durable.
After removing the masking fluid I hit the model with a coat of GX100 gloss varnish in anticipation of the decals.
Decals were out of the box, and went down somewhat well. Being from Eduard, I decided to experiment with removing the carrier film with Tamiya Enamel thinner. This went well and helped achieve an even greater painted on effect.
After over a month I’ve finnaly completed the major construction phase of the Tiger project. I won’t lie, it’s been a bit of a slog with all the extra detail I wanted to add to the build however it was to be expected. of course. After completing the hull construction I naturally moved onto the turret which was somewhat more straightforward.
Like the hull, cast texture and weld details were added where needed. For the track brackets I added 3d printed Rochm parts which I found added a great amount of detail for being such small additions.
I also wanted to try my hand at adding cloth details with Tamiya epoxy putty. I really liked how this putty handles when baby powder is added, it rolls very thin and doesn’t stick at all. I’ll definitely be using this technique in the future.
Also of note are the figures I picked out for the build, which were by Alpine and Stalingrad. I really liked the quality of both, although I found that the Alpine offering was slightly better quality than the one by Stalingrad.
Part of the reason of going through the entire mockup process was that I wanted to experiment with stowage options for the Tiger. I knew from reference photos that Tigers didn’t really have a lot of stuff pilled up on the rear deck however I couldn’t resist adding some bits and pieces here and there.
It’s a short and sweet update this time around but I wanted to get some photos out of this build before moving onto the painting phase. Enjoy the glamour shots below!
With the wrap-up of my D-Day LCA build I was able to move on to a project I’ve been looking forward to for some time now, a revisit to the infamous Tiger tank. The last Tiger I built was in 2017 (see the projects tab) and at the time it was probably the best kit I had completed. I’ve been able to grow my skillset since then and it’ll be an interesting comparison to see the two builds side by side and document my growth as a modeller.
For the build itself I picked up the excellent Dragon 6820 kit, otherwise known as the “131” Tiger. Even though it is marketed as a Tunisian variant specific to Pz.Abt 504 it can be built up as any early Tiger, especially the vehicles at Kursk. Even though it’s a 2015 release this is still a high quality kit in 2024.
Speaking of the subject I had in mind I’ll be building another Kursk vehicle (exciting I know!). This project started with the markings to be honest. I was swayed by a set from Echelon that depicted the 3.SS Pz.Rgt. “Totenkopf” during Operation Citadel. I was interested in the distinct yellow numbering of the vehicle numbers and felt that over a camo scheme of dunkelgelb and olivegrun the vehicle would pop really nicely.
With such a high potential with this build I also decided to absolutely pack it to the gills with aftermarket. The full list is below:
Trex Studio 3d printed tracks
Trex Studio 3d printed Feifel filters
Rochm Full detail photo etched set
Rochm 3d printed spare track holders
Voyager brass cleaning rods
Master metal barrel
Aber late model brass shackle
Alpine Minatures Panzer commander summer
Stalingrad WSS Panzer crewman Kursk 1943
Construction was anything but straightforward on this project. Dragon can be infamous for having busy instructions and with all the accessories added in this kit, I was frequently going back and forth between different instruction sheets. Additionally the aftermarket accessories had overlap in some places and I had to decide which sets I wanted to utilize for the build. A good example of this are the tool clamps. Rochm provides photo etched tool clamps that you have to assemble. I also had a spare set of MJ miniatures 3d printed clamps in my spares drawer which I opted to use instead, as they come pre-assembled.
After a few weeks on the bench I had completed most of the hull construction. To enhance the detail on the model, I added cast texture and weld beads using Tamiya grey putty and epoxy putty respectivley. To add the weld beads, I first had to scribe out a groove and after assembling the hull I was able to work the putty inside the pre-made gaps and apply a weld texture with a scratch built tool.
I can’t lie, this phase of the build was very tedious and time consuming. Spending the time to attach then weld the dozen or so photo-etch mounting block took something out of me. Looks great at the end though. While joining the hull pieces together I found that the lower hull “bathtub” had quite a significant warp to it and needed additional prodding to allow other pieces to slot into their attachment points. The frontal armour pieces were especially useful in forcing the hull into the correct alignment. After the major construction of the hull was completed, I turned my focus to the small sub assemblies and parts that would be fixed in place on the final model.
Tool construction was up next, and as I touched on earlier I opted to use 3d printed clamps to improve this area of the model. The jack block was improved as well by scraping a razor saw along the surface to simulate a more realistic woodgrain texture.
hull construction followed, unsurprisingly, with more photo-etch. I started working on the fenders and found they built up surprisingly easily. A few bends here and there and they were completed. What caused me issues however were the hinges on the front and rear fenders. Each fender required two complete hinge assemblies with two parts each. Suffice to say, this was a tedious process and somewhat time consuming. Was it worth it? You be the judge:
The side fenders were pretty straightforward and went together a lot better. I did have some issues affixing them to the hull as the mounting blocks were a bit off but all together I think they went on very well. I opted to remove some fenders on the front of the tank to add some visual interest as well.
Quite a bit of work was done to the rear of the vehicle as well including test fitting the T-Rex studio Feifel filter along with some stowage from Panzerart and Ultracast. I also tested fitted the tow cable to see what positions worked in relation to the planned stowage.
I also neglected to attach one of the headlights and S-mine launchers as from my reference photos I could tell that the specific vehicle I wanted to document was missing these features on the right side.
All in all this build so far has been unnaturally slow for me. I’m almost a month in and it feels like it’s taking forever yet I know that slow and steady is the required strategy for this project. There are too many possible issues that could creep up if this project is rushed. With so much aftermarket being included in the build it’ll be easy to miss things but as long as I take my time then I’ll be able to finish this project to the standard I’m aiming for.
I recently completed my British LCA and with today being the 80th Anniversary of the landings it only seems fitting to wrap up the project today. Final construction went pretty smoothly with no major hurdles after completing the main painting and weathering process.
Final construction largely consisted of attaching the ramp, doors, and other surface details that were kept off for painting. I had expected that the process for adding the ramp ropes to give me some issues however the process went well and was straightforward.
I also found that the anchor rope had too much of a reddish colour and sprayed a light coat of brown to knock it down a bit. I added the included tools on top of the deck along with the Bren gun and that was it! Enjoy the final photos below.
With progress moving quickly on the LCA I found myself at the painting stage earlier than I had expected. For the build I planned to keep the weathering on the more subtle side for numerous reasons, primarily the fact that these vehicles didn’t see as much wear as land based armour. This is not to say that LCA’s did not wear at all however but rather that in my option a restrained weathering approach was in order.
Early painting steps included priming in Mr. Finishing Surfacer 1500 black (my preferred type of primer) and a random light grey shade I had lying around, which in this case was AK’s “light sky blue”. When choosing colours for marbling I took into account the shades of the final base colours and selected a paint that was slightly lighter than the final grey shade. I did this because the black of the primer will heavily darken the final coat of the model if the marble colour is not light enough to offset the black. This was a lesson I learnt during the painting process of my Kinetic CF-18 and as a result the whole build was tinted slightly too dark.
After the initial marble coat with the light sky blue I had a fairly good base for further pre-shading and paint variation. The LCA is a very geometric craft and has really distinct paneling, The large square armour plates are very distinct in contrast to the diagonal planks. I really wanted to take advantage of these shapes so I decided I wanted to implement some drastic pre-shading for this build. This would also help on the weathering side as the kind of finish this would produce was in line with how I wanted to depict the finished model.
I used several new shades to introduce further paint variation, White, Black, Sky blue, and oddly enough, Dunkelgleb (which looks like lime green when sprayed lightly over light grey). For this stage I wanted hard transitions between these shades and the underlying marble coat and to get them I used Uschi metal airbrush stencils. They are quite good and I recommend anybody who is serious about incorporating presiding techniques in their workflow to pick up a set. One drawback to these however is the fact that they cannot be bent to contour a curved surface. This wasn’t a huge issue in this build as the LCA is a very boxy craft. That said you don’t need to have the stencil completely flush to get hard demarcation lines and holding them slightly away from the model will still yield good results. I sprayed these shades only over specific shapes, taking care the the colours did not spill over too much.
For masking I used AK’s hard edge masking putty. I’ve used it in the past and even though it can be a bit frustrating to use at times, I’ve been able to get good results with it. In fact part of the reason I picked this specific type of landing craft and not Gecko Model’s U.S landing craft was because I found this specific hard edge scheme quite interesting.
For the final scheme colours I used Mr. Colour Lacquers, with RLM 76 light blue used as the grey shade and Intermediate blue used as the blue colour. Even though the bottle says “light blue” this colour is very close to being grey and with the pre-shading underneath it has a further grey tint.
At this stage before applying any vanishes I started the weathering process in the form of slight paint chipping. I thought it was important to add some visual interest to the sides as not adding weathering in this area will cause the model to look uninteresting and boring in my opinion. All chipping was applied with a brush, a technique I’ve gotten good at over the past few months. I used to avoid brush chipping like the plague but since I got my hands on some super fine brushes I’ve found the technique a whole lot more easier than before. There’s also the fact that with traditional chipping methods such as hairspray chipping you can have a bit of a time limit in the sense that if you paint cures it can be difficult to get it to chip the way you want. There’s still a place for HS chipping but as my workflow shifts to include more pre and post shading I’m not sure where that place will be moving forward.
Decals were straightforward for this build, a grand total of 6 to apply. I used VMS satin coat to seal the model and after doing a test run on a chemical dummy I discovered that Tamiya mark fit super strong nearly melted the acrylic vanish I settled on the far more tame Micro sol/set combo. Decals were fine to use (If a bit thick) and settled around surface detail well. I was a bit concerned about how they would settle over the hull ribbing but it was no issue.
Initial weathering steps consisted of a dark brown (almost black) oil wash. I limited myself to a pinkish on the large steel plates and did a broader wash on the planks on the side. This had the effect of causing the large plates to appear cleaner than the planks further adding some colour modulation.
I wanted to add some algae deposits on the lower hull and to do so I picked out a dark green shade of oil paint. to achieve the desired look I added diluted oil paint in dots along the bottom and blended it with thinner. Like a lot of the weathering I did on this model the effect is really subtle but the cumulative effect of half a dozen techniques adds up.
At this stage I also added some extra pieces onto the full after the majority of the watering stage was completed. This included the ropes on the side along with the lifting eyes. I left these off because painting and weathering the hull would have been a nightmare with them on and I could paint the ropes separately and not have to worry about overspray onto the hull. After these parts were added the last weathering effect I did was to add scratches to the anchor rest on the rear of the craft. This area would have seen the most wear on the entire vehicle as the anchor would have banged onto it each time it was lowered and raised, causing significant scarring.
I also wanted to add some visual interest to the canvas covers above the cabin. I felt that this area would get significantly dirty with the exposure to salt water and crew walking on top. weather this area I mixed up a tan/white oil paint mixture and applied it around the outside of the canvas cover. Then, I applied a dark brown mixture on the inside to represent grime accumulated from crew activity. I really like how this area turned out and it added some much needed visual interest to a fairly boring part of the craft.
Also of note are the ring life preservers added onto the top of the hull. I made some considerable improvements to the way they came in the kit and I really like they way they improve the colour on the model. Gecko has you just glue them to the deck, however there’s no way that in real life they would actually stay in place so I had to come up with a way in which they would plausibly stay attached. I looked at reference photos and I saw that the majority of WW2 British life rings had a rope going around the outside of the ring and using some scale rope I had on hand I recreated what I had seen in reference photos and fastened them to the hull in a way that seemed natural.
At this stage I hit the model with a coat of matte varnish and was finally able to unmask the interior wood planking inside of the vehicle. At this stage the weathering process was more or less done with just subassemblies and minor painting left to go on the build. Enjoy the photos below and thanks for looking!